2023年6月1日 星期四

HGU – Supported Service Scenarios

From https://halny.com/knowledge-base/hgu-supported-service-scenarios/


HGU mode allows to flow multiple traffic classes across VEIP.
All UNI interfaces are belonged to one VEIP and it cannot be controlled by OMCI.
This non-OMCI part can be controlled by Web and Auto provisioning.
Most OLT vendors support dual stack:
– IP-HOST #1 -> MGMT (WEB, XML provisioning) – configure by OMCI (from OLT)
– VEIP (non-OMCI : INTERNET, VoIP, IPTV services) – configure by ONT WEB or provisioning



1.Bridge mode – only INTERNET:1-4/WIFI + MGMT

2.Bridge mode – INTERNET:1-4/WIFI, VoIP Interface + MGMT

3.Bridge mode – INTERNET:1-2/WIFI, IPTV:3-4, VoIP Interface + MGMT

4.Router mode – only INTERNET:1-4/WIFI + MGMT

5.Router mode – INTERNET:1-4/WIFI, VoIP Interface + MGMT

6.Router mode – INTERNET:1-2/WIFI, IPTV:3-4, VoIP + MGMT

SFU – Supported Service Scenarios

From: https://halny.com/knowledge-base/sfu-supported-service-scenarios/


1.Access mode – only Internet

2.Access mode – only IPTV

3.Transparent mode – Internet, IPTV, VoIP

4.VLAN translation – rBSA

5.802.1q in 802.1q Begin/End of Tunnel

6.Transparent 802.1q in 802.1q

7.OSE/MdO

OMCI協議二層功能的模型選擇

From:https://blog.csdn.net/JIANGXIN04211/article/details/48294645

我們知道有兩種大的二層功能,即MAC橋以及802.1p映射。
MAC橋是IEEE 802.1D描述的,有許多的特性,可以基於MAC地址透明轉發(True bridging)或VLAN characteristics(利用VLAN filter)。而映射功能描述了一個用戶側實體到1到8個網絡側流標記的關係。那種映射與只利用VLAN標記中pbit字段作為VLAN filters的MAC橋是相等的。


那兩種基本二層服務能組合實現各種連接要求。有三種大的基本模式:

N:1 bridging多個用戶端口在同一個橋中,而只有一個網絡服務

1:M mapping基於pbit來將一個用戶端口映射成多個網絡側服務

1:P filtering  基於非pbit的VLAN信息來將單一的用戶端口映射成多個網絡側服務

除了以上三個基本可能外,也有四種複雜的組合。即:

N:M bridging mapping顧名思義,N個用戶端口在一個橋中先橋轉發然後再進行基於pbit的映射。

1:MP map-filtering 一個用戶端口做filtering以及mapping

N:P bridging-filtering N個用戶端口在一個橋中先橋轉發然後再進行基於非pbit的VLAN信息的映射

N:MP bridging-map-filtering顯而易見。

系統性地,tag filtering發生在接近MAC橋而不是tagging操作的部位。如下順序:

ANI—Tag operation—Tag filtering—Bridging—Tag filtering—Tag operation—UNI

許多公司實現了非802.1p模型而採用最簡單的bridging模型,而最簡單一種是每個用戶端在一個Bridge中。1:P模型被採用。如果是多端口的CPE設備(一般由Interworking模塊,如Broadlight chip與交換Switch模塊,如Broadcom switch組成),那塊switch chip每個用戶口有個port VLAN(每個端口不一樣),為了區隔彼此。對於Untag流需要映射pbit的話可以採用管理對象(ID:171 Extended VLAN Tagging operation configuration data)屬性來達到要求。

 

參考:G.984.4 Section 8.2.2

How to use simple speedtest in RaspberryPi CLI

  pi@ChunchaiRPI2:/tmp $  wget -O speedtest-cli https://raw.githubusercontent.com/sivel/speedtest-cli/master/speedtest.py --2023-06-26 10:4...